iD Additives to Feature iD Eco-Pro 360 Cart at PLASTEC West Show

FOR IMMEDIATE RELEASE

FOR FURTHER INFORMATION CONTACT:

Nick Sotos, iD Additives, Inc., (708) 588-0081 ext. 1 or nsotos@idadditives.com, or

Greg Hannoosh, Next Step Communications, Inc., (207) 703-0343 or ghannoosh@next-step.com

iD ADDITIVES TO FEATURE NEW iD ECO-PRO 360 CART WITH PUMP/FILTER SYSTEM FOR CLEANING INTERNAL COOLING PASSAGES AT PLASTEC WEST

PLASTEC West, Anaheim, CA, February 11-13, Booth 3840

LaGrange, IL (January 13, 2020) . . . iD Additives, Inc., a leading North American supplier of additives including foaming agents, purging compounds and MRO products to the plastics industry, will feature its new iD Eco-Pro 360 Cart with an integrated pump/filter system at PLASTEC West. The new system cleans internal cooling passages and works with the company’s rust removal and preventative product, iD Eco-Pro 360, that provides fast, eco-friendly rust removal on injection molds, heat exchangers, blown film dies, and other products.

Representatives from PCS Company will also be at the iD Additives booth at PLASTEC West. PCS is the exclusive distributor of iD Eco-Pro 360 to injection molders and moldmakers in the USA.

In addition, iD Additives will display its latest products and solutions for the plastics industry at the show, including the company’s iD Purge products, QuickShots single-dose purge compounds, and Foaming Agents for molding or extruding lightweight parts.

The built-in filter function on the new iD Eco-Pro 360 Cart allows the Eco-Pro 360 solution to remain at peak performance for optimal reusability.

“This new product is ideal for cleaning rust, limescale, etc. out of hard-to-reach internal channels, such as water lines in a heat exchanger or an injection mold,” said Nick Sotos, President of iD Additives. “It is perfect for the maintenance departments of molding facilities.”

Features and benefits of the new iD Eco-Pro 360 Cart include:

-Compatible with iD Eco-Pro 360 chemical

-Runs off of compressed air, no electrical connections needed

-When used with iD Eco-Pro 360, no water is needed

-Operating capacity is 5 to 55 gallons

-Unit can be supplied with HDPE plastic drum for iD Eco-Pro 360 (various sizes available)

About iD Eco-Pro 360

iD Eco-Pro 360 is a rust removal and preventative product that provides fast, eco-friendly rust removal on injection molds, blown film dies, and other products. iD Eco-Pro 360 is a green, water-based, environmentally safe, EPA tested and verified product that is fast and highly effective method at removing rust. The product is non-hazardous, non-aerosol, and non-flammable.

Benefits of iD Eco-Pro 360 include:

-Removes mill oil, flash rust, and white rust without etching

-Provides a protective coating for long-term rust protection

-Works on all ferrous and non-ferrous metal surfaces

-Cleans, coats and seals – preventing further oxidation

-Reduces labor, time and cost

-Made in the USA

An added benefit of iD Eco-Pro 360 is that it is reusable. After filtering out any rust particles, all of the fluid used to clean a mold or other products can be re-used numerous times.

iD Eco-Pro 360 is available in four sizes: 16-ounce spray bottles, 1 Gallon Containers, 5 Gallon Containers, and 55 Gallon Drums.

iD Additives has posted a video and frequently asked questions on iD Eco-Pro 360 on its website at www.idadditives.com, and other videos on their YouTube channel at www.youtube.com/idadditives.

About iD Additives, Inc.

Based in LaGrange, IL, iD Additives, Inc. is a young company backed by many years of experience and expertise in fulfilling additive needs in the plastics industry.

iD’s products and services are of the highest quality, yet engineered to be efficient and cost effective. iD has a line of foaming agents, UV stabilizer systems, purging compounds, rust removal and preventative products, and additives that will fulfill a majority of our customers’ needs. For any additional needs, we will quickly design custom products. Our unique compounding technology allows us to supply our customers with speed, versatility, and accuracy. Coupling foaming agent technology with other additive and colorant needs allows us to offer a cost effective, “One Pellet Solution” for our customers’ additive needs. We offer full technical support for all the products that we sell to maximize the results.

Visit our website at www.iDAdditives.com, visit our company page on LinkedIn, follow us on Twitter at @iDadditives, or subscribe to our YouTube channel for more information.

Click here to learn more about the iD Eco-Pro 360 Cart: https://www.idadditives.com/id-eco-pro-360-cart

Featured Posts
Recent Posts
Archive
Search By Tags
No tags yet.
Follow Us
  • Facebook Basic Square
  • Twitter Basic Square
  • Google+ Basic Square
  • YouTube - White Circle
  • White LinkedIn Icon
  • Twitter Clean
  • White Facebook Icon

T: 1-708-588-0081

iD Additives, Inc. | 512 W. Burlington Ave | La Grange | IL | 60525

SPE-rebrands,-launches-new-website,-iden

 

©  2011-2020 iDAdditives -Purging Compounds, Foaming Agents & Liquid Systems. All rights reserved.